Igwe eji arụ ọrụ Aluminom Ọkwa Micron

Aluminom bụ ọla ọcha na-acha ọcha nke dị mfe ịgbatị, a na-ejikwa akụkụ nhazi ya mee ihe na ndụ anyị kwa ụbọchị, n'ihi na ọ dị mma conductivity, thermal conductivity, ductility, mfe nkedo ịkpụzi na na.
Njupụta nke Aluminom bụ 2.70 g / cm³, naanị ihe dị ka otu ụzọ n'ụzọ atọ nke ígwè.

Ụdị
Aluminom alloy a na-emeso ya siri ike karị, ma nwee ọmarịcha ọla. Dị ka ihe dị iche nke mejupụtara, anyị nwere ike kewaa aluminum alloy n'ime ọtụtụ usoro:

Usoro 1000
A na-akpọkwa usoro aluminom dị ọcha, ọdịnaya aluminom dị elu, ọgwụgwọ elu dị mma, nguzogide corrosion ya kacha mma na alloy aluminum, mana ike dị ala.
[Ịdị ọcha bụ 99.6%, 99.8%, 99.85%, n'otu n'otu]

Usoro 2000
Ọdịnaya ọla kọpa dị elu, ihe dịka 3-5%, nke nwere isi ike dị elu, yana nguzogide corrosion na-adịghị mma.

Usoro 3000
Ọdịnaya nke manganese dị n'etiti 1.0-1.5%, nwere ezigbo ọrụ mgbochi. (Ntụaka Model: 3003,3105,3A21)

Usoro 4000
Silicon ọdịnaya bụ n'etiti 4.5-6.0%, na ezi corrosion eguzogide, elu ike.

Usoro 5000
Ọdịnaya magnesium dị n'etiti 3-5%, a pụkwara ịkpọ Al-Mg alloy. Ihe ndị bụ isi bụ njupụta dị ala, ike ike dị elu, ọnụego elongation dị elu.

Usoro 6000
Tumadi gụnyere magnesium na silicon ọcha, dabara maka ngwa nke elu corrosion iguzogide na oxidation chọrọ.(Reference Model:6061)

Usoro 7000
Ọ bụ Al-Mg-Zn-Cu alloy, nke bụ nke usoro ụgbọ elu, yana ezigbo nguzogide abrasion.

Nrụpụta CNC:

Ụzọ ndị bụ isi nke nhazi aluminom na-atụgharị, extruding, na-agbatị na forging.Our aluminom nhazi igwe nwere 16 nha na nhazi nhazi dị iche iche maka ụdị nhazi dị iche iche chọrọ. Anyị nwere ike ịhazi mpaghara ahụ adịghị ibu karịa 400 * 600 mm, na ndidi nke ngwaahịa emechara ruru ± 0.02 mm.

Mgbawa aja:

Ọ bụ usoro ihicha na coarsening n'elu mkpụrụ site na mmetụta nke nnukwu ọsọ aja eruba. Ebumnuche bụ isi nke nzọụkwụ a bụ ịgba ọkụ n'elu. Foto ndị a na-egosi ihe dị iche.

                               Tupu Mgbawa aja                                                                      Mgbe Sand gbawara

Agba agba oxidized

A na-emepụta ihe nkiri oxide (Al2O3) n'elu aluminom na ngwaahịa alloy ya site na usoro artificial, a na-etinyekwa agba dị iche iche iji meziwanye nkwụsị nke aluminom, mee ka ndụ ọrụ dịkwuo ogologo ma nwekwuo ọdịdị agba. All agba dị n'aka anyị, na ndidi ruo micron larịị.0.005mm)